» » Bandai Hobby Teases an Image of Sazabi (RG Sazabi)

April 18, 2018
51

Bandai Hobby twitted an image of Sazabi on Wednesday to tease fans on their upcoming GunPla...

Bandai Hobby official website posted CG images of the RG MSN-04 Sazabi on their website on Friday [April 20, 2018].

The kit will be released in August 2018 for 4,860 Yen! You can see more images here: https://www.gundamkitscollection.com/2018/04/rg-1144-msn-04-sazabi-release-info.html

Labels:

51 comments:

  1. Replies

    1. Did you forget how the RG Sinanju turned out?

      Delete

    2. So? Didn't you see what they did to Unicorn? Is there any correlation between Sinanju and Sazabi?

      Delete

    4. RG Sinanju suffered the same issue as other top heavy RG kits. The only difference is, it used a frame with a vertical pivot in the waist.

      Still better than RG Zeta.

      Delete

    5. I have it, doesn't have any problems.

      Some people reported problems with the waist, if not pushed in all the way.

      Delete

    7. Sinanju turned out to be flop because it reused mk-II innerframe,which is not really good for a bigger kit.Had it used new frame specialized for it,maybe it would have been better.Just look at RG unicorn.I believe they could have done better with Sinanju.

      I do hope it's RG too,since the price of the Ver.KA is out of my range.But it'll be weird if it stands side by side with my Nu Ver.KA.

      Delete

    8. @鋤鍋物焼 Not necessarily a bad kit, just extremely flimsy cause of the transformation. Still a dam good looking real grade though

      Delete

    9. 鋤鍋物焼 no u are bad little Suitroll. go back, to ur room and think about what u did.

      Delete

  2. Metal Robot Damashii most likely. Or something from that line.

    ReplyDelete

  3. RG or Metal Robot Damashii I think. Maybe PG?

    ReplyDelete
    Replies

    2. Suitroll stop being a weeaboo with ur kanji names.

      Delete

    3. 鋤鍋物焼 For someone who claims to hate UC stuffs with a burning passion, you sure talk too much about it, Water Technique 629.

      Delete

  4. THIS WILL DEFINITELY BE MY FIRST PG AND RG

    ReplyDelete
    Replies

    1. But we do not know if this is a PG or RG announcement. Bandai didn't say yet.

      Delete

    2. boi you know how expensive a pg sazabi would be?

      Delete

    3. IK there's no official announcement. But if it were a PG or RG then it would be my first(MGs for life). And I am fully aware of how an expensive this PG would be, which is why It'll be my only one for a long long time.

      Delete

  5. Very likely it is rg. Taobao.com(China e-commerce site, like amazon) has some sellers post pre-order. Some of them, most people believe, have insight within Bandai manufacturing line (which locates in China).

    ReplyDelete
    Replies

    1. I don't trust Chinese sites. I think Bandai will make an official announcement soon.

      Delete

    2. This is false. Bandai manufactures in Japan. You can see videos of their factory on Youtube. The front of the boxes very clearly state "Made in Japan".

      Delete

    3. 鋤鍋物焼 Even the Chinese aren't spared of your hate, Water Jutsu 629?!

      Delete

  6. Already spent a good time building out the 1/100 metallic coating ver, the 1/100 ver KA , and 1/100 clear edition... would be nice to be a 1/60 PG, .. but cant' we just get a 1/100 or PG Kshatriya already? =)

    ReplyDelete

  7. I could see it being a RG, or perhaps a bust of some kind.

    ReplyDelete

  9. I hope it is an RG sazabi, the details look like it. It could also be a PG
    I hope this also leads to an RG Nu/Hi-Nu gundam,

    ReplyDelete
    Replies

    1. definitely not a pg, they never release pgs so soon after one and a pg sazabi would probably be too big and expensive

      Delete

  10. worst case would be it's going to be a pucchiguy sazabi custom or a super fumina in sazabi armors.
    >:D

    ReplyDelete
  12. Replies

    1. Well we got the ver.ka a few years back and that was good

      Delete

  13. probably rg or metal, no chance of pg, not now atleast

    ReplyDelete

  15. There's a lot of detail when you zoom on on that pic,so a RG or PG imo.

    ReplyDelete

  16. For a RG yeah sweet then soon later a RG Nu Gundam but anything other then a RG dosnt make sense since I feel the MG Ver.Ka is still a top of a line kit.

    ReplyDelete
  17. Replies

    1. But the HGUC Sazabi is really good, it doesn't need a Revive.
      Revives are for old HGUCs that don't match up with modern quality standards hencewhy the Guncannon, Gyan, Qubeley/s, Hyaku-Shiki, Gouf & RX-78-2 were remade because their original HGUC kits were from 1999-2001 as HGUCs 001, 002, 004/011, 005, 009 & 021/050 respectively.
      The Blue Destinys & Ground Gundam, despite their originals being from 2007 where the HGUC kits quality became noticibly improved, were remade because the GM Ground was released and they were easy remolds since all they needed was new chest vents/vulcans, heads and backpacks.

      Delete

  19. Isn't this is how they teased RG Sinanju before??

    ReplyDelete

  20. Isn't this is how they teased RG Sinanju before??

    ReplyDelete

  21. If RG: I'm game since i'm getting all the retail RGs.
    If MG: Redundant since the Ver KA is a thing.
    If PG: That thing will be a MONSTER! In size and in the amount of damage to our wallets.

    ReplyDelete

  22. I think it's not a real grade they would probably release a rg nu gundam before the sazibi

    ReplyDelete
    Replies

    1. Well they did released RG Sinanju first before they released RG Unicorn, maybe they'll go with the same route on this one too, fingers crossed though.

      Delete

  23. Have been confirmed it's gonna be RG, rejoice everyone RG nu is coming :D

    ReplyDelete

  24. Woot Woot.. It's confirm the next RG is RG Sazabi!!!!!!!

    ReplyDelete

GOOGLE ACCOUNT IS REQUIRED TO POST ON OUR COMMENT SECTION.

Subscribe to: Post Comments (Atom)